THE ART OF LIFTING

suxxesion

Suxxesion T40E.90

Published January 29, 2015 | By suxxesion
Two Suxxesion type T40E 90 to unmould and turn over 90 degr tunnel lining elements for a tunnel to feed a hydropowerstation at Illbergertal in Austria. Tubings are taken from the outside and inside radius. Continue reading →

Suxxesion T16E.180

Published January 29, 2015 | By suxxesion
Suxxesion type T16E 180 suspended from overhead travelling crane in operation as BS beton St Oedenrode the Netherlands. Lifting and turning of various concrete elements. Continue reading →

Suxxesion T100.E90

Published January 29, 2015 | By suxxesion
Suxxesion T 100 E90 to handle wallelements at C BS Wielsbeke Belgium. Lifting and turning capacity 10.000 kg. The device belongs to a total handling system to unmould L shaped wall elements out of the production, to bring these elements to a turning station and to evacuate these elements to the stock yard. Continue reading →

Suxxesion T160E.180

Published January 29, 2015 | By suxxesion
Suxxesion T 160E 180 to handle concrete water tanks and basements. System supplied with a similar device however suitable to unmould lift and turn basements with a total weight of 32.000 kg. The devices are in operation at O-Beton in Rumbeke Belgium. Continue reading →

Suxxesion DEHK.600

Published January 21, 2015 | By suxxesion
Suxxesion type DEHK 600 double pipe lifter suspended from the hook of a mobile portal crane. In total 4 of these devices have been built for the load out of the concrete lined pipes for the North Stream pipeline Continue reading →

Suxxesion HK.180

Published January 21, 2015 | By suxxesion
Suxxesion HK 180 attachment to be suspended from the rotator of a 180 RHKV vacuum lifting system in case a top layer of pipes covered with snow have to be removed. The attachments is in operation at Vyksa Metalurgical plant in Russia. Several models are available for nominal pipe lengths of 12 and 18 m. Continue reading →

Suxxesion 150.ES

Published January 21, 2015 | By suxxesion
One of the two Suxxesion type 150 ES for steel sheet handling at DSSM in Rodekró in Denmark. The devices can be extended with an attachment to handle steel sheets. Continue reading →

Suxxesion 160.S

Published January 21, 2015 | By suxxesion
One of the three Suxxesion type 160 S for steel sheet handling at OMK Vyksa Russia . These attachments are suspended from a Suxxesion type RHKV 180 vacuum lifting system with rotator integrated in a Sennebogen M870 knuckle boom crane. Continue reading →

Suxxesion 160.EP

Published January 21, 2015 | By suxxesion
One of the four Suxxesion type 160 EP supplied in 2005 to Qatar for the Dolphin pipe coating yard. Devices suspended from overhead travelling cranes to load and off load pipes from trucks and the feed the coating factory. Continue reading →