THE ART OF LIFTING
Suxxesion 300.TE180
Designed to unmold and turn prefabricated basements and underground watertanks. By handling with vacuum the fresh molded concrete can be lifted after only 8 hours curing time. By applying smooth vacuum handling a lot of time and money is saved. The steel reinforcements in the concrete can be lighter due to the fact that the lifting force is divided over the surface under the suction pads instead of peak forces around lifting points attached to the steel reinforcements. Continue reading
Suxxesion 400.DHK
The device is suspended from the twistlocks of a container spreader. The hydraulic feed is coming from the carrying machine as well as 24 V power for the control box on the device. The EHK 400 is controlled by means of remote control carried by the operator inside the cabin of the Reach stacker. It can also be used in combination with other types of container spreaders suspended from harbor cranes or bridge cranes. The device is equipped with two spreader beams. One fixed to the main frame and the second beam on a sliding construction enabling to adopt the C-C depending of the size of the pipe Continue reading
Suxxesion 200.EHVP
All electrical parts are supplied according to the latest standard. For the steering of the device we have used Siemens S7 PLC to be able to steer all elements for this. Inside the cabin of gantry crane the control panel has been built. Continue reading
Suxxesion 120.ES
By using suxxesion vacuum lifting equipment the number of personnel is kept to a minimum. Because the sheet can be stored on top of another without spacers, the space needed for storage is minimized. Continue reading
Suxxesion 320.HS
The device has two individual vacuum systems for each suction pad. In case one pump fails, both systems can be connected to each other to finish the operation. The power to drive the pumps is taken from the stacker as well as the electric power for the controls and electrical components on the vacuum lifting system. Continue reading
Suxxesion 300.HS
The hydraulic feed for the vacuum pump is taken from the spreader as well as the electrical power of 24V= to feed the logo processor and the blue tooth remote control receiver. Operation is done by means of a control panel built inside the cabin. Communication trough blue tooth wireless control. The device can be easily put aside and the stacker can be used for container handeling. Continue reading